Benutzer:Frankenstone

test

Bootargs mit Hilfe von Hyperterminal setzten

Dazu muss man Bootvorgang der UFS 910 unterbrechen.
Wie man den Bootvorgang der UFS 910 unterbricht, haben wir hier beschrieben.
Dann kann man mit Hyperterminal die Bootargs setzen, löschen und editieren.

--- Bootargs setzten ---

Beispiel an Hand der Mustervorlage

set 'ethaddr=00:50:fd:ff:12:34'
set 'bootcmd=bootm a0040000'
set 'board=stb7100ref_27'
set 'autoload=n'
set 'bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=1280 coprocessor_mem=2m@0x04000000,2m@0x04200000'
set 'ipaddr=192.168.178.100'
set 'gatewayip=192.168.178.1'
set 'gateway=192.168.178.1'
set 'netmask=255.255.255.0'
set 'serverip=192.168.178.50'
set 'bootmenutimeout=2'
set 'front=3'
set 'backupper=3'
set 'backlower=0'
set 'hdd=no'
set 'bootdesc_0=----Flash----'
set 'bootcmd_0=run bootargs_0; bootm a0040000'
set'bootargs_0=set bootargs console=ttyAS0,115200 root=/dev/mtdblock2 ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:kathrein:eth0:off mem=64m 
coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:${ethaddr} init=/bin/devinit'
set 'bootdesc_9=----USB-1----'
set 'bootdesc_8=----USB-2----'
set 'bootdesc_7=----USB-3----'
set 'bootcmd_9=usb reset;ext2load usb 0:2 a5000000 /boot/uImage;run bootargs_9;bootm a5000000'
set 'bootcmd_8=usb reset;ext2load usb 0:3 a5000000 /boot/uImage;run bootargs_8;bootm a5000000'
set 'bootcmd_7=usb reset;ext2load usb 0:4 a5000000 /boot/uImage;run bootargs_7;bootm a5000000'
set 'bootargs_9=set bootargs console=ttyAS0,115200 root=/dev/sda2 rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:kathrein:eth0:off mem=64m 
coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=${rootdelay} usb-storage.usbwait123=${front}:${backupper}:${backlower} nwhwconf=device:eth0,hwaddr:${ethaddr} 
init=/bin/devinit'
set 'bootargs_8=set bootargs console=ttyAS0,115200 root=/dev/sda3 rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:kathrein:eth0:off mem=64m 
coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=${rootdelay} usb-storage.usbwait123=${front}:${backupper}:${backlower} nwhwconf=device:eth0,hwaddr:${ethaddr} 
init=/bin/devinit'
set 'bootargs_7=set bootargs console=ttyAS0,115200 root=/dev/sda4 rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:kathrein:eth0:off mem=64m 
coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=${rootdelay} usb-storage.usbwait123=${front}:${backupper}:${backlower} nwhwconf=device:eth0,hwaddr:${ethaddr} 
init=/bin/devinit'
set 'boot_param_version=22'
set 'bootdelay=1'
set 'rootdelay=4'
set 'stdin=serial'
set 'stdout=serial'
set 'stderr=serial'
set 'bootdesc_default=7'

Zurück zum Menü